Skip to main content
NESdev Wiki
Toggle Dark/Light/Auto mode Toggle Dark/Light/Auto mode Toggle Dark/Light/Auto mode Back to homepage

INES Mapper 180

UxROM (inverted)
CompanyNichibutsu
Games1 in NesCartDB
ComplexityDiscrete logic
BoardsUNROM
PRG ROM capacity128K/4096K
PRG ROM window16K fixed + 16K
PRG RAM capacityNone
CHR capacity8K
CHR windown/a
Nametable arrangementFixed H or V, controlled by solder pads
Bus conflictsYes
IRQNo
AudioNo
iNES mappers180, 002, 094
NESCartDB
iNES 180

INES Mapper 180 is used to represent an unusual configuration of the UNROM board used only for the game Crazy Climber.

Notes

It is similar in principle to the more common INES Mapper 002 configuration but uses AND logic (74HC08) instead of OR logic (74HC32), producing a fixed first bank at $8000 rather than a fixed last bank at $C000.

Crazy Climber had a special “climber stick” add-on that mounted a stick on top of the Famicom’s directional pad.

For a similar mapper with additional mirroring control, see iNES Mapper 097.

Banks

  • CPU $8000-$BFFF: 16 KB PRG ROM bank, fixed to the first bank
  • CPU $C000-$FFFF: 16 KB switchable PRG ROM bank

Registers

Bank select ($8000-$FFFF)

7  bit  0
---- ----
xxxx xPPP
      |||
      +++-- Select 16 KB PRG ROM bank for CPU $C000-$FFFF

See also

Edit this page on GitHub